Bitte loggen sie sich ein oder registrieren sie sich.

Einloggen mit Benutzername, Passwort und Sitzungslänge

Autor Thema: Warum Käseecken manchmal brechen  (Gelesen 3041 mal)

shary

  • Administrator
  • Megafig
  • *****
  • Beiträge: 3178
    • http://www.brick.at
Warum Käseecken manchmal brechen
« am: 28. Januar 2011, 17:20:25 Nachmittag »

Im Ambassadorforum ist das Problem angesprochen worden, dass manche Teile etwas häufiger Probleme mit Rissen haben bzw. leichter brechen... dazu gehören zB die Käseecken (1x1 Schrägsteine). Ein Beispiel:



Der Grund dafür liegt im Spritzguss und ist ein technisches Problem, das bei gewissen Teilen auf Grund deren Größe oder Form gelegentlich auftritt. Ich selbst hatte bisher noch keine Probleme damit aber es ist interessant zu wissen, warum es auftreten kann. Solltet ihr betroffen sein gilt wie immer: der Kundendienst ersetzt kaputte Teile. Nur keine Scheu, die sind sehr nett und regeln das normaler Weise sehr flott und problemlos.

Hier die genaue Antwort in Englisch:

If you ask the engineers and material specialist in TLG they will say that 1X something bricks was invented by the devil due to difficulties in ensuring that they do not crack

When the plastic is injected in to the mould cavity the melt front tend to cool a little. On 1X something bricks two melt fronts meet at the end of the brick. At the attached picture you see very clearly on a brick where the melt fronts meets. It is the scratch like marks. the brick is weaker at this point and if the melt have been slightly to cool the brick becomes to weak. It can happen during start-up or if the machine have been stopped for some reason. When the brick is build tension is right at that weak line for 1X something bricks and if some "finger grease" is then apply the element might break.

It is a problem we always have had and if  I look at my old LEGO collection that is 25 - 30 years old I can find many elements that are broken. It is normally not possible to se until you build with the element.

I hope this explain the technically reason behind.
Gespeichert
Unsere LEGO Fan Seite: www.brick.at

Stefan

  • Vereinsmitglieder
  • Megafig
  • ****
  • Beiträge: 1349
  • Space MOCer
    • flickr
Re: Warum Käseecken manchmal brechen
« Antwort #1 am: 04. Februar 2011, 16:13:57 Nachmittag »

Mir ist das auch noch nie passiert, alle Käseecken die ich jemals verwendet habe sind noch heil.
Aber Danke für die Erklärung, hört sich schlüssig an.
Gespeichert
Meine MOCs auf flickr:
http://www.flickr.com/photos/brainbikerider/

Legolize it!

Georg

  • Megafig
  • ****
  • Beiträge: 832
    • Shipwrecker's Inn
Re: Warum Käseecken manchmal brechen
« Antwort #2 am: 02. März 2011, 17:35:31 Nachmittag »

Interessant, ich hab das Problem auch noch nie gesehn. Bei mir werden hauptsächlich die Lampensteine (headlight brick) und diverse Technik-Teile kaputt.

Der Reifen sieht übrigens auch nicht mehr so toll aus, am Foto :P
Gespeichert