Allgemeines => Suche/Biete/Tausche => Thema gestartet von: herb66 am 02. November 2019, 10:53:56 Vormittag
-
sorry, hab meinen Beitrag irrtümlich verstümmelt
-
Hätte nur dieses Grün
-
7 dark green round hab ich.
Die green tiles brauchst du in 1x2 oder 1x3? Ist schwer zu erkennen
LG Sonja
-
Hat wirklich niemand dieses Teil über:
(https://img.bricklink.com/ItemImage/PN/5/32063.png) 4x red
BitteDanke fürs Nachschauen!
LG, Herb
-
Hat wirklich niemand dieses Teil über:
(https://img.bricklink.com/ItemImage/PN/5/32063.png) 4x red
BitteDanke fürs Nachschauen!
LG, Herb
ich schau am Abend
-
Herb
Hat wirklich niemand dieses Teil über:
(https://img.bricklink.com/ItemImage/PN/5/32063.png) 4x red
BitteDanke fürs Nachschauen!
LG, Herb
Sorry, hab's erst heute gelesen!
Ich hab Dutzende, aber leider nicht in rot!
... kann orange, blau, grün udgl anbieten! ;)
lgM
-
sorry auch nur gelb, grau und schwarz
-
Bin gerade sehr fasziniert von dem Teil - dürfte etwas seltenes sein, wenn der günstigste auf Bricklink € 3,45 kostet.
Ich begebe mich auf die Suche ....
-
Bin gerade sehr fasziniert von dem Teil - dürfte etwas seltenes sein, wenn der günstigste auf Bricklink € 3,45 kostet.
Ich begebe mich auf die Suche ....
Ooops, das war mir nicht bewusst. Unter diesen Umständen brauch ich nur mehr 2.
Bzw auch keine mehr, weil für ein Kornberg-Microscale-Set sind solche Teile nicht brauchbar. Da wäre umplanen eher angesagt. Hab schon eine kleine Idee.
Danke für den Hinweis!
-
(https://img.bricklink.com/ItemImage/PN/68/2420.png) in dark orange 1x
(https://img.bricklink.com/ItemImage/PN/68/54200.png) käseecke 1x1 in dark orange 28x
irgendjemand? bitte danke fürs Nachschauen
-
(https://img.bricklink.com/ItemImage/PN/68/2420.png) in dark orange 1x
Kannst du von mir haben, ich packs zu den anderen Teilen.
LG Doris
-
(https://img.bricklink.com/P/1/30208.jpg)
1x in weiß DRINGEND für Kornberg, auch leihweise!
Bei der nächsten BL-Bestellung kann ich dann eins mitbestellen.
Kam zuletzt bei diesem Set raus:
(https://www.bricklink.com/SL/7658-1.jpg?0) Wenn da für ein paar Wochen eins fehlt, wär ja nicht so tragisch, oder?
-
Leihweise ja.
-
Hat irgendjemand von euch rigid hoses in green herumkugeln, der er nicht mehr braucht?
Ich brauche insgesamt ca. 48 studs lang, auch gern in Teilmengen.
Beispielsbild:
(https://img.bricklink.com/ItemImage/PT/6/75c09.t2.png)
Danke fürs Nachschauen!
Außerdem solche Bögelchen, ebenfalls in green:
(https://img.bricklink.com/ItemImage/PT/6/6005.t2.png)
Da freu ich mich über jedes einzelne.
-
Die grünen Bögen sollte ich haben, wie viele brauchst du? LG Sonja
-
um die 40 insgesamt, 2 bekomm ich vom Lord
-
Um meine Fun House für St. Florian realisieren zu können, brauch ich noch:
(https://img.bricklink.com/ItemImage/PT/2/30236.t1.png) 8x in tan
(https://img.bricklink.com/ItemImage/PT/3/2335.t1.png) 2x in yellow
(https://img.bricklink.com/ItemImage/PT/5/59349.t1.png) 1x in rot
(https://img.bricklink.com/ItemImage/PT/86/13786pb01.t2.png) 2x
Außerdem könnte ich ganz gut noch folgendes brauchen:
(https://img.bricklink.com/ItemImage/PT/86/61409.t2.png) ein paar in light bluish grey
(https://img.bricklink.com/ItemImage/PT/86/29119.t2.png)
(https://img.bricklink.com/ItemImage/PT/86/29120.t2.png)
je eins in light bluish grey (für meine Bregenz Skyline)
BitteDanke fürs Nachschauen!
-
ein paar davon sollt ich haben, schau dann daheim nach...
-
ein paar habe ich sicher auch -
Katzen hätte ich nur rote, auf alle anderen besteht ein Ausfuhrverbot
-
Um meine Fun House für St. Florian realisieren zu können, brauch ich noch:
(https://img.bricklink.com/ItemImage/PT/2/30236.t1.png) 8x in tan
(https://img.bricklink.com/ItemImage/PT/3/2335.t1.png) 2x in yellow
(https://img.bricklink.com/ItemImage/PT/5/59349.t1.png) 1x in rot
(https://img.bricklink.com/ItemImage/PT/86/13786pb01.t2.png) 2x
Außerdem könnte ich ganz gut noch folgendes brauchen:
(https://img.bricklink.com/ItemImage/PT/86/61409.t2.png) ein paar in light bluish grey
(https://img.bricklink.com/ItemImage/PT/86/29119.t2.png)
(https://img.bricklink.com/ItemImage/PT/86/29120.t2.png)
je eins in light bluish grey (für meine Bregenz Skyline)
BitteDanke fürs Nachschauen!
2x Brick mod. in tan
2x Flag in yellow
1x panel in red
5x slope in lbg
hab ich für dich.
-
ein paar habe ich sicher auch -
Katzen hätte ich nur rote, auf alle anderen besteht ein Ausfuhrverbot
Sind die baugleich? Weil dann nähme ich auch 2 rote.
-
ein paar habe ich sicher auch -
Katzen hätte ich nur rote, auf alle anderen besteht ein Ausfuhrverbot
Sind die baugleich? Weil dann nähme ich auch 2 rote.
sind baugleich
-
Für meine 33 cm hohe und 47 cm lange Sisi-Kapelle kann ich folgende mir fehlende Teile nicht durch andere Teile ersetzen:
(https://img.bricklink.com/ItemImage/PN/12/3005.png) 70x brick 1x1 trans-clear vielleicht 20 vom Lord
(https://img.bricklink.com/ItemImage/PN/18/3065.png) 1x brick 1x2 trans-neon orange
(https://img.bricklink.com/ItemImage/PN/1/30383.png) 3x hinge plate 1x2 with one finger on top white vom Lord
(https://img.bricklink.com/ItemImage/PN/85/30413.png) 3x panel 1x4x1 dark bluish grey
(https://img.bricklink.com/ItemImage/PN/1/61409.png) 10x slope 18° 1x2 white 4x vom Lord
(https://img.bricklink.com/ItemImage/PN/1/35464.png) 2x slope 45° 1x1 double white
(https://img.bricklink.com/ItemImage/PN/88/3701.png) 4x technic brick 1x4 reddish brown vom Lord
(https://img.bricklink.com/ItemImage/PN/86/32063.png) 6x technic liftarm thin 6L light bluish grey (bitte kein altgrau!) oder yellow von Mike
(https://img.bricklink.com/ItemImage/PN/85/87079.png) 4x tile 2x4 dark bluish gray vom Lord
(https://img.bricklink.com/ItemImage/PN/1/33909.png) 78x tile mod 2x2 with 2 studs white 14 vom Lord
Ich freu mich über jede Teilmenge!
Bitte Danke fürs Nachschauen!
LG, Herb
-
hätte folgendes:
(https://img.bricklink.com/ItemImage/PN/1/61409.png) 4x slope 18° 1x2 white
(https://img.bricklink.com/ItemImage/PN/88/3701.png) 4x technic brick 1x4 reddish brown
(https://img.bricklink.com/ItemImage/PN/85/87079.png) 4x tile 2x4 dark bluish gray
(https://img.bricklink.com/ItemImage/PN/1/33909.png) 14x tile mod 2x2 with 2 studs white
von denen vielleicht 20
(https://img.bricklink.com/ItemImage/PN/12/3005.png) brick 1x1 trans-clear
die hätte ich ihn schwarz bzw 1x gelb, 1x weiß wenn das was hilft
(https://img.bricklink.com/ItemImage/PN/86/32063.png) 6x technic liftarm thin 6L light bluish grey (bitte kein altgrau!) oder yellow
könnte sein, aber ich muss weiß noch sortieren (da könnte vielleicht auch noch weitere Käsereiben auftauchen)
(https://img.bricklink.com/ItemImage/PN/1/30383.png) 3x hinge plate 1x2 with one finger on top white
lg sjk
-
Die liftarms in grau bekomm ich von Mike, alles andere: freu! :)
-
weiter offen:
(https://img.bricklink.com/ItemImage/PN/12/3005.png) 50-70x brick 1x1 trans-clear vielleicht 20 vom Lord
(https://img.bricklink.com/ItemImage/PN/18/3065.png) 1x brick 1x2 trans-neon orange
(https://img.bricklink.com/ItemImage/PN/85/30413.png) 3x panel 1x4x1 dark bluish grey von Peter
(https://img.bricklink.com/ItemImage/PN/1/61409.png) 6x slope 18° 1x2 white von Peter
(https://img.bricklink.com/ItemImage/PN/1/35464.png) 2x slope 45° 1x1 double white
(https://img.bricklink.com/ItemImage/PN/1/33909.png) 64x tile mod 2x2 with 2 studs white (8 davon kann ich durch eine andere Farbe ersetzen, bleiben 56)
-
Käsereiben und Panels hab ich für dich.
-
Danke an alle Teilespender. Ich brauch nur noch die 3 Panels vom Peter, die Käsereiben hab ich durch Abbau meines Jugendstilhauses selbst schürfen können bzw. hab ich von SJK auch ein paar bekommen. Die transparenten 1x1-er bricks konnte ich großteils durch 1x2-er ersetzen, ragen sie halt in den Kirchenraum hinein und den transorange brick hab ich freuchtfröhlich durch transyellow ersetzt. Den Rest (tile mod) hab ich bestellt - ist somit erledigt.
-
Für Egeskov suche ich noch:
(https://img.bricklink.com/ItemImage/PT/59/3048c.t2.png) triple! 6x dark red
(https://img.bricklink.com/ItemImage/PT/59/4460a.t2.png) (Version egal) 4x dark red
(https://img.bricklink.com/ItemImage/PT/155/4162.t2.png) tile 1x8 olive green 3x
(https://img.bricklink.com/ItemImage/PT/5/3623.t2.png) 10x red
(https://img.bricklink.com/ItemImage/PT/88/85080.t2.png) 4x reddish brown
(https://img.bricklink.com/ItemImage/PT/48/60481.t2.png) 1x sand green
BitteDanke fürs Nachschauen!
-
Die Dachecken kannst du von uns haben.
LG Doris
-
Die 10 mal in rot hätte ich
-
(https://img.bricklink.com/ItemImage/PN/6/91405.png) plate 16x16 1x green (bright green und andere hab ich selber, ich brauch genau diese eine Farbe) gerne auch im Tausch 1:2 gegen andere Farbe(n)
-
Kannst du von uns haben.
LG Doris und Manfred
-
(https://img.bricklink.com/ItemImage/PN/1/10164pb01.png)
ich bräuchte ein paar von denen und würd mich über jeden einzelnen freuen
danke und LG,
herb
-
Herb
(https://img.bricklink.com/ItemImage/PN/1/10164pb01.png)
ich bräuchte ein paar von denen und würd mich über jeden einzelnen freuen
danke und LG,
herb
... für den Bauwettbewerb? ;)
lgM
-
für die analoge umsetzung
-
Wie viele sind ein paar?
Irgendwo liegen sicher welche rum ..
-
12
von Sonja bekomm ich 3
-
7
(von mir bekommst du 5)
-
(https://img.bricklink.com/ItemImage/PN/88/3033.png) 6x10 3x in reddish brown
viel Hoffnung hab ich ja nicht ...
Vielleicht kanns mir ja wer borgen, Rückgabemöglichkeit vorauss. innerhalb eines Jahres.
LG,
Herb
-
Die 3 Platten kannst du von uns haben.
LG Doris
-
Für mein Modell Schloss Eckartsau brauche ich noch 2 solcher Platten in grün:
(https://img.bricklink.com/ItemImage/PN/6/3036.png)
-
Hätte ich Unmengen.
Müsste es allerdings schicken :D
-
Hätte ich Unmengen.
Müsste es allerdings schicken :D
Ich nehm auch geschickte und auch 10, wenn du soviel über hast.
-
Ok, leg' ich dir weg.
LG Doris
-
Wer jetzt? :D
-
Wer jetzt? :D
Habe da scheinbar die nächste Seite übersehen. Ich habe dir 2 Stk. weggelegt.
-
Wer jetzt? :D
Markus, wenn Du zu viele hast, bitte lass mir 10 Stk zukommen, musst halt sagen, was Du bekommst incl. Porto.
Hast Du eigentlich, oder jemand in Deiner Nähe, einen BL-Store, dann könnten wir das über den laufen lassen. Ich brauch eh immer auch andere Sachen.
@ Doris: Ich melde mich bei Dir.
LG,
Herb
-
Passt, schickst mir deine Adresse per WA und dann sende ich gleich los.
LG
-
Passt, schickst mir deine Adresse per WA und dann sende ich gleich los.
LG
Wenn Du Doris die grauen 1x2er schickst, gib einfach bitte die paar Platten dazu, dann isses 1x Porto weniger! Danke!
-
Passt, schickst mir deine Adresse per WA und dann sende ich gleich los.
LG
Wenn Du Doris die grauen 1x2er schickst, gib einfach bitte die paar Platten dazu, dann isses 1x Porto weniger! Danke!
Sind schon da.
-
(https://img.bricklink.com/ItemImage/PN/11/14716.png) 1x1x3 3x black
(https://img.bricklink.com/ItemImage/PN/12/85941.png) 2x4x5 1x trans-clear
(https://img.bricklink.com/ItemImage/PN/85/3024.png) 5x dark bluish gray
(https://img.bricklink.com/ItemImage/PN/2/98283.png) 14x tan (oder 7x die Variante 1x4)
BitteDanke fürs Nachschauen!
-
Wir haben für dich:
1x schwarz
5x dark bluish gray
14x tan
LG Doris und Manfred
-
Hallo Herb,
wenn du weitere "Profile brick" 1x2 Tan brauscht, hätte ich noch ein paar.
lg
-
Von den schwarzen haben wir noch 2 gefunden!
LG Doris
-
Hallo Herb,
wenn du weitere "Profile brick" 1x2 Tan brauscht, hätte ich noch ein paar.
lg
Wenn du mir noch 10-20 abtreten könntest, wär ich Dir dankbar.
-
(https://img.bricklink.com/ItemImage/PN/85/2429c01.png) 4x in dark bluish grey und 1x in light bluish grey
(https://img.bricklink.com/ItemImage/PN/85/85984.png) 5-10x in dark bluish gray
BitteDanke fürs Nachschauen und für Angebote
LG,
Herb
-
Hallo Herb :wave:
Kannst von mir haben.
Lg Lokführer
-
(https://img.bricklink.com/ItemImage/PN/12/92474.png)
Und hat jemand so ein Teil in transclear?
https://www.bricklink.com/v2/catalog/catalogitem.page?P=92474#T=C&C=12 (https://www.bricklink.com/v2/catalog/catalogitem.page?P=92474#T=C&C=12)
-
Ich glaube schon, kann dir heute Abend nachschauen.
-
dann brauch ich noch 2 solche #4 in red
(https://img.bricklink.com/ItemImage/PN/5/32192.png)
-
Hab ich für dich, wenn's dir in St. Florian reicht
-
Hab ich für dich, wenn's dir in St. Florian reicht
reicht mir, thx
-
Ich glaube schon, kann dir heute Abend nachschauen.
Ich hab mich getäuscht, ich hab den Windscreen leider doch nicht.
-
Kein Problem, danke fürs Nachschauen!
-
(https://img.bricklink.com/ItemImage/PN/88/85984.png) 10x reddish brown
(https://img.bricklink.com/ItemImage/PN/2/4185.png) 22x tan
(https://img.bricklink.com/ItemImage/PN/88/48092.png) 2x reddish brown
(https://img.bricklink.com/ItemImage/PN/2/6134.png) 2x tan
(https://img.bricklink.com/ItemImage/PN/11/11212.png) 2x black
(https://img.bricklink.com/ItemImage/PN/1/30137.png) 2x weiß
(https://img.bricklink.com/ItemImage/PN/59/14719.png) 2x dark red
(https://img.bricklink.com/ItemImage/PN/4/15573.png) 5x orange
(https://img.bricklink.com/ItemImage/PN/15/2412b.png) 2x trans lightblue
(https://img.bricklink.com/ItemImage/PN/1/26047.png) 1x white
(https://img.bricklink.com/ItemImage/PN/5/61184.png) 1x red
(https://img.bricklink.com/ItemImage/PN/69/4073.png) 2x dark tan
(https://img.bricklink.com/ItemImage/PN/69/4070.png) 1x dark tan
(https://img.bricklink.com/ItemImage/PN/34/4070.png) 1x lime
(https://img.bricklink.com/ItemImage/PN/36/15573.png) 2x bright green
(https://img.bricklink.com/ItemImage/PN/36/63864.png) 1x3 2x bright green
BitteDanke fürs Nachschauen
-
Hallo Herb,
von uns kannst du haben:
(https://img.bricklink.com/ItemImage/PN/11/11212.png) 2x black
(https://img.bricklink.com/ItemImage/PN/1/26047.png) 1x white
(https://img.bricklink.com/ItemImage/PN/34/4070.png) 1x lime
LG Doris und Manfred
-
Müssen die weißen Palisaden 1x4er neu sein?
-
Haben täte ich für dich:
(https://img.bricklink.com/ItemImage/PN/88/85984.png) 6x reddish brown
(https://img.bricklink.com/ItemImage/PN/2/4185.png) 12x tan
(https://img.bricklink.com/ItemImage/PN/1/30137.png) 2x weiß wenn nicht NEU gefordert ist!
-
solang sie nicht zu vergilbt sind, würd ich sie nehmen
-
Ich schenk dir die weißen Pallisaden, sind ein paar Kratzer drin, nicht mehr 100% weiß...
-
(https://img.bricklink.com/ItemImage/PN/1/6538b.png) 2x weiß
(https://img.bricklink.com/ItemImage/PN/85/6246d.png) 1x dark bluish grey
und die zwei oben
-
Die weißen hab ich in dein Sackerl gepackt.
LG Doris
-
Obiges ist mittlerweile erledigt, danke an die Spender!
- - -
Jetzt suche ich bzw Fabi für ein Modell 32x dieses Zahnrad in light bluish grey
(https://img.bricklink.com/ItemImage/PN/9/6589.png)
Es kam doch in 49 Sets in dieser Farbe vor, man bekommt es bei BL aber nur, wenn man alle auf einen Sitz kaufen möchte ab 36 cent pro Stück. Das kommt mir ziemlich teuer vor, einzelne bekommt man ab 8 cent.
Bitte vielleicht bekomme ich durch das Forum so viele zusammen, dass ich zu den weniger teuren BL-Händlern greifen kann, um dann den Rest dort zu bestellen. Vielen Dank fürs Nachschauen!
Außerdem noch:
(https://img.bricklink.com/ItemImage/PN/11/92585.png) 1x in black
(https://img.bricklink.com/ItemImage/PN/86/32000.png) mind. 2x in light bluish grey, evt. ein paar mehr
-
Hallo
5 Stück 1x2 bricks kannst du von mir haben.
Lg Lokführer
-
Hallo
5 Stück 1x2 bricks kannst du von mir haben.
Lg Lokführer
Wolfgang hat auch die Zahnräder für mich. Vielen Dank!
Bleibt nur mehr die Brechstange.
-
(https://img.bricklink.com/ItemImage/PN/95/22388.png) 17 Stk in flat silver
-
(https://img.bricklink.com/ItemImage/PN/95/22388.png) 17 Stk in flat silver
Kannst haben. Ich schau noch wegen des Stemmeisens.
-
Wieder mal alles hier bekommen. Danke an die edlen Spender!
Somit vorläufig hier nix offen.
-
Wir (Junior und ich) würde rigid hoses in dark bluish grey suchen, verschiedene Längen ab 5L, möglichst nicht verbogen. Hat da vielleicht jemand was für uns?
Würde auch gern welche in dark gray (altgrau) und silberne nehmen.
außerdem:
(https://img.bricklink.com/ItemImage/PN/85/6005.png) 1x dark bluish grey
(https://img.bricklink.com/ItemImage/PN/85/11211.png) 4x dark bluish grey
(https://img.bricklink.com/ItemImage/PN/85/87994.png) 2x dark bluish grey
(https://img.bricklink.com/ItemImage/PN/2/2555.png) 3x tan (Version egal)
(https://img.bricklink.com/ItemImage/PN/2/60478.png) 6x tan
(https://img.bricklink.com/ItemImage/PN/2/14769.png) 1x tan (Version egal)
(https://img.bricklink.com/ItemImage/PN/2/10247.png) 12x tan
-
Wir (Junior und ich) würde rigid hoses in dark bluish grey suchen, verschiedene Längen ab 5L, möglichst nicht verbogen. Hat da vielleicht jemand was für uns?
Würde auch gern welche in dark gray (altgrau) und silberne nehmen.
außerdem:
(https://img.bricklink.com/ItemImage/PN/85/6005.png) 1x dark bluish grey
(https://img.bricklink.com/ItemImage/PN/2/2555.png) 3x tan (Version egal)
Hab ich für dich
-
von mir kannst folgende haben:
(https://img.bricklink.com/ItemImage/PN/85/11211.png) 4x dark bluish grey
(https://img.bricklink.com/ItemImage/PN/2/14769.png) 1x tan (Version egal)
plus vier mal dieses
(https://img.bricklink.com/ItemImage/PN/2/10247.png) 12x tan
-
(https://img.bricklink.com/ItemImage/PN/6/2921.png) 18x in green (freu mich auch über Teilmengen)
-
Wolfgang hat 17 für mich :hello2:,
also 1 würd i no brauchen.
-
Das eine kann ich beisteuern.
-
(https://img.bricklink.com/ItemImage/PT/2/35787.t2.png) 5x in tan
(https://img.bricklink.com/ItemImage/PN/11/4740.png) dish 2x2 116x in schwarz
(https://img.bricklink.com/P/6/30374.jpg) 4L 1x green
-
(https://img.bricklink.com/ItemImage/PN/11/4740.png) dish 2x2 116x in schwarz
davon kannst 60 Stück von mir haben
-
16x dishes und 1x grünes Stangerl kommt von uns.
-
(https://img.bricklink.com/ItemImage/PT/18/22388.t2.png) 4x trans-neon-orange
(https://img.bricklink.com/ItemImage/PN/7/3660.png) 3x blue
Die kannst von mir haben wennst möchtest
-
ja, möchte ich, danke
bei der nächsten Lieferung dazu und passt. thx
-
(https://img.bricklink.com/ItemImage/PT/1/4287.t1.png) 7x weiß
-
(https://img.bricklink.com/ItemImage/PT/1/4287.t1.png) 7x weiß
Kannst du von uns haben.
-
suche ein paar Teile in alten Farben:
(https://img.bricklink.com/ItemImage/PT/8/3848.t2.png) 1x brown
(https://img.bricklink.com/ItemImage/PT/9/3659.t2.png) 1x light grey
(https://img.bricklink.com/ItemImage/PN/9/3004.png) 3x light grey
(https://img.bricklink.com/ItemImage/PN/9/2357.png) 1x light grey
(https://img.bricklink.com/ItemImage/PN/9/3030.png) (4x10) 1x light grey
-
Hätte ich alles
-
Hätte ich alles
Wenn du dir den Versand sparen willst, ich hätte die Teile auch.
-
(https://img.bricklink.com/P/59/43723.jpg) suche 1x in dark red. Danke fürs Nachschauen.
-
Ups, das habe ich übersehen. Suchst du den Teil noch?
-
das eine, das ich dringend gebraucht hab, hab ich schon, aber ich brauch trotzdem noch eins oder besser zwei
-
Ok, hätt' ich für dich.
-
(https://img.bricklink.com/ItemImage/PT/1/87080.t2.png) 87080 #1 1x white
(https://img.bricklink.com/ItemImage/PT/1/87086.t2.png) 87086 #2 2x white
(https://img.bricklink.com/ItemImage/PT/14/3070b.t2.png) 1x1 2x trans-darkblue
BitteDanke fürs Nachschauen!
LG,
Herb
-
Die trans dark blue Teile kannst du von uns haben.
LG Doris
-
(https://img.bricklink.com/ItemImage/PN/6/4070.png)
Dieses Teil gabs in dieser Farbe (green) in der Wand, ich hatte eine ganze Menge davon, hab jetzt aber alle aufgebraucht und würd mich freuen, wenn mir jemand mind. 1 Stück davon zum LEGO Treffen in Wien mitbringen könnte, ich würd aber auch nicht ungern 10 bis 20 nehmen. Aber 1 Stk brauch ich dringend.
Bitte Danke!
cheers,
Herb
-
Ist eingepackt.
LG Doris
-
(https://img.bricklink.com/ItemImage/PN/2/64570.png) 3x in tan
Die waren in dieser Farbe in den ganzen Friends Cubes drin. Ich würd daher auch gern 2 solcher Cubes kaufen, wenn die wer im Angebot hat. Oder vielleicht weiß jemand, ob es wo Wühlkisten gibt, zB bei Interspar, wo man die im Angebot noch bekommt.
Es sind die einzigen 3 Teile, die mir für mein Tullner-City Haus fehlen. Alles andere hatte ich auf Lager.
Ich bin am Sa beim Fantreffen in Steyr, vielleicht wäre dort eine evt. Übergabe möglich.
Thx,
Herb
-
sollte ich zwei haben
(https://img.bricklink.com/ItemImage/PN/2/64570.png) 3x in tan
Die waren in dieser Farbe in den ganzen Friends Cubes drin. Ich würd daher auch gern 2 solcher Cubes kaufen, wenn die wer im Angebot hat. Oder vielleicht weiß jemand, ob es wo Wühlkisten gibt, zB bei Interspar, wo man die im Angebot noch bekommt.
Es sind die einzigen 3 Teile, die mir für mein Tullner-City Haus fehlen. Alles andere hatte ich auf Lager.
Ich bin am Sa beim Fantreffen in Steyr, vielleicht wäre dort eine evt. Übergabe möglich.
Thx,
Herb
-
(https://img.bricklink.com/ItemImage/PN/7/30357.png) 2x blue
Bitte-danke fürs Nachschauen!
-
(https://img.bricklink.com/ItemImage/PN/7/30357.png) 2x blue
Bitte-danke fürs Nachschauen!
Nehm ich dir morgen mit
-
(https://img.bricklink.com/ItemImage/PN/7/88393.png) 1x in blau
-
Morgen als ganzes habe ich den Stein nicht aber in 1x2er kann ich sie dir anbieten.
-
Morgen als ganzes habe ich den Stein nicht aber in 1x2er kann ich sie dir anbieten.
Danke fürs Angebot, ich behalts mal im Kopf, vielleicht komm ich noch darauf zurück.